• OXY5737A
  • Intel® QM87 EBX SBC, Core i7/i5/i3 CPU Haswell & SSD Soldering Onboard, Stackable with StackPC & FPE Expansion, Extended Temperature - 40°C to 85°C
  • Introduction
  • OXY5737A EBX SBC is based on Intel® Haswell QM87 chipset and supports Intel's 4th Generation Haswell Core™ i7/i5/i3 processor. It is operating effectively in harsh environments ranging from -40 to 85°C and is perfect solution for military, transportation, factory automation and digital signage applications. More key functions are featuring in the stacking PCIe/104 expansion ability, flexible I/O functions for triple display ports (2 x DP, LVDS, DVI-I), SATA 3.0 SSD soldering on board and 9~36V DC-in power support.
  • Feature
  • •Intel® 4th Generation Core™ i7/i5/i3 Haswell processors on board
  • •Stackable Expansions : 1 x PCIe_16 (FPE), 4 x PCIe_1 (PCIe/104)
  • •XR-DIMM up to 8 GB RAM
  • •Onboard NANO SATA 3.0 SSD up to 32 GB
  • •Pen Mount 6000 Resistive Touch Controller on board
  • •Multi-Displays by 2 x DP, 1 x DVI-I, 1 x Dual Channel 24-bit LVDS
  • •2 x mPCIe Expansion slot (One Co-Layout with mSATA)
  • •2 x PCIe Intel® Gigabit Ethernet
  • •4 x USB 3.0, 2 x USB 2.0, 6 x COM , 2 x SATA III
  • •+9V~36V DC-in with power delay on/off
  • •Extended Temperature -40~+85°C
Model OXY5737A-UT
System CPU Type Intel® Core™ i7/i5/i3, Haswell BGA type
Core i7-4700EQ (4C x 2.4/1.7GHz), 6M Cache, (47W/37W)
Core i5-4400E (2C x 2.7 GHz), 3M Cache (37W)
Core i3-4102E (2C x 1.6GHz), 3M Cache (25W)
Celeron 2000E (2C x 2.2GHz), 2M Cache (37W)
Chipset QM87 PCH
Memory Type 1 x DDR3 1600 XR-DIMM up to 8 GB w/ECC
Super I/O ITE8786
Watchdog 1-255 sec. or 1-255 min. software programmable, can generate system reset
Expansion Slot 2 x mPCIe (1 x SIM card, 1 x colay with mSATA)
Touch Penmount 6000
Display Chipset Integrated GFX in Haswell processor
DVI-I Yes (Max. resolution 2048 x 1536)
LVDS Dual channel 24-bit LVDS
Display Type 2 x DP, LVDS, DVI-I (DVI-D+VGA)
Audio Codec Realtek ALC887 High Definition Audio Codec
Ethernet Chipset Intel® I210IT & i218-LM GbE
Boot from LAN Yes for PXE
Rear I/O DP 2
LAN 2 x RJ45
COM 1 x RS232/422/485 with 5V/12V selectable
USB 2 x USB 3.0
Audio 1 x MIC, 1 x Line out
Power Connector 1 (Terminal Block co-lay 4-pin connector with lock)
Internal I/O Touch Panel 1 x 4-pin
Front Panel 1 (2 x 5-pin)
Smart Fan 1 x CPU Fan, 1 x System Fan
Power Connector 2 (1 x 4-pin/ 2 x 2-pin)
SATA 2 x SATAIII (6 Gb/s)
USB 2 x USB 2.0 by pin header
COM 5 x COM ports
4 x RS232, 1 x RS232/422/485, all with 5V/12V selectable
LVDS 2 x 15-pin
DIO 2 x 10-pin, 8 in/8 out with isolation
SIM card holder 1
Power Requirements Input Voltage 9 to 36 VDC
(4-pin terminal block for V+, V+, V-, V-)
Power Consumption without LVDS output
With no load on 4 USB ports 4A@9VDC, 45W
1.6A@24VDC, 45W
1.1A@36VDC, 45W
With full load on 4 USB ports 5A@9VDC, 45W
1.875A@24VDC, 45W
1.25A@36VDC, 45W
Mechanical and Environment Form Factor EBX
Power Type 9V to 36V DC-in, AT/ATX mode support
with power delay on/off
Dimension 203 x 146 mm (5.75" x 8")
Operating Temp. -20 to 70°C
Storage Temp. -40 to 85°C
Relative Humidity 10% to 90%, non-condensing