• OXY5535B
  • Intel® Ivy Bridge Core™ i7 StackPC (PCIe/104) with QM77 Chipset, Extended Temperature. -40 to 85°C
  • • Supports Intel® Ivy Bridge CPU onboard
  • • StackPC-FPE CPU module, next generation of PCIe/104
  • • 1 x StackPC, 1 x FPE
  • • Supports 1 x PCIe_16, 1 x PCIe_4, 4 x PCIe, 4 x USB, 2 x GbE
  • • VGA, DVI-D, 24-bit LVDS
  • • Onboard SATA NAND Drive up to 32 GB (MLC)
  • • Rugged XR-DIMM DDR3 1600 support up to 8GB w/ECC
  • • 12V DC-in
  • • Extended operation temp. -40 to 85°C



  • Introduction
  • StackPC is the new standard of embedded stackable system design, the OXY5535B presents the new approach to stackable system design and development. The main competitive distinction of the StackPC connector is the combination of most popular low speed interfaces such as USB, COM, CAN, SPI, LPC and high speed SATA, Gigabit Ethernet and PCI-Express x1, x4 within one stack expansion connector. This combination allows to minimize the number of wired connections inside the stack system enclosure and gives more design and manufacturing flexibility. The StackPC modules are much easier to be designed due to the consistent stack up systems development only. This approach doesn't require placing high speed and low speed signal switches. The stack direction specifies the mechanical part on host and peripheral modules, which makes them cost-effective as well as easy to design, verify and use. The unified approach to stack power supply and communication interfaces output is aimed to increase the different vendors products' compatibility.



  • Benefits of StackPC - Expansion Connector
  • The StackPC Specification defines new approach to stackable systems design and development. The specification includes all valuable heritages of PC/104 standards along with the new features of StackPC connector.

  • The main competitive distinction of the StackPC connector is the combination of most popular low speed interfaces such as USB, COM, CAN, SPI, LPC and high speed SATA, Gigabit Ethernet and PCI-Express x1, x4 within one stack expansion connector.

  • The dimension and pin of the StackPC connector is as the same as the PCIe/104 connector.







  • • Compatibility with PCIe/104
  • • BANK1 is the same
  • • PCIe x4 StackPC modules can be placed into PCIe/104 stack on the TOP
  • • The same protection mechanism as in Type1/Type2
  • • BANK1 is the same as PCIe/104 Type2
  • • Universal modules are fully compatible

 

 

  • • Flexibility in adaptation to most popular form factors
  • • Maximum compatibility with the most popular PCIe/104 modules
  • • More features with FPE expansion up to PCIe_16

 

 

  • • EPIC SBC Carrier Module SK507
  • • StackPC-FPE carrier module in EPIC form factor
  • • 2 x mPCIe
  • • 1 x VGA, 1 x DP
  • • 4 x USB3.0
  • • 2 x GbE
  • • 2 x RS485
  • • 1 x SATA, 1 x CFast