OXY5316A
3.5'' SBC Intel® Cedarview N2800 with DDR3 SO-DIMM, Dual Display by LVDS/DVI-I, Dual GbE LAN, Audio, 5 x COM, 7 x USB, and 12V DC-in -40°C to 85°C
- Intel® Atom Cedarview N2800 + Intel NM10 PCH on board
- Dual independent display: DVI-I, LVDS
- Rich I/O interface with 5 COM, 7 USB, 2 LAN, 2 SATAII, and 1 CFast Socket
- Flexible expansion with 1 x mini PCIe
- Support Single Channel 18/24-bit single/dual LVDS
- 12V DC-in, 4-pin ATX power connector, AT/ATX mode support
- Extended operating temperature -40°C to 85°C
- Technical Profile
- Specifications
- CPU
- SSD Performance
Introduction
OXY5316A, 3.5” form factor industrial motherboard, driven by Intel® 3rd generation Atom Cedarview N2800 processor and NM10 chipset on board. The feature of OXY5316A is to provide ultra low power consumption of only 6.5W and chipset of 2.1W while supporting dual-core of 1.86 GHz of CPU clock speed. This powerful dual-core operation and energy-saving low power design make OXY5316A an ideal candidate for display, automation, transportation, medical and more applications. To fulfill small form factor with versatile functions, OXY5316A supports one SATA II port and one CFast slot for storage, the maximum memory can be up to DDR3 4GB. Onboard there are up to five COM ports with 5V/12V (one RS232/422/482, four RS232), seven USB 2.0 and dual LAN by RTL8111E chip which supports wake on LAN. Apart from rich I/O for extension and system integration, PERFECTRON’s OXY5316A is design to meet rugged operating environment, from most important power, clock generator to Super I/O components, PERFECTRON only use extended operating temperature components to ensure the wide range temperature from -40°C to 85°C. And by processor and chipset soldering on board, this Cedarview 3.5”SBC can withstand high level of shock and vibration. With these two features, OXY5316A can work extra well in ruggedized missions and to perform superior stability and reliability.
Rich I/O interface – Extensive Functionality
Rich I/O design endows OXY5316A with the ability to comprehend present day automation devices, display, and other applications that require extensive I/O features. With 5 COM ports, 7 USB, 2 LAN, 2 SATAII (one by CFast) and dual-display (DVI-I + LVDS), OXY5316A provides a wide array of choices to expand and connect to different devices.
Extended Temperature Operation
PERFECTRON aims to provide excellent performance to all types of temperature zone. From component selection to layout design, we dedicate our knowledge to make sure that our boards can stand extreme temperature. OXY5316A can operate from -40 up to 85 degree, our strict manufacture procedure guarantees supreme performance in severe environment.
Efficient thermal solution
A tailor-made heat spreader is what PERFECTRON provide for engineers to reduce mechanical design period also ensures the highest efficacy for dissipation. For OXY5316A, the customized heat sink is placed on top of the CPU and chipset, acting as the medium that exchanges the heat to the surrounding atmosphere. The highly efficient aluminum heat sink has a thermal conductivity to absorb the heat generated by the pumping CPU.
Installation Instruction
Procedure: Place the thermal pad on top of the CPU and chipset, and then stick the heat sink upwards.
Thermal Pad
Thermal pad is widely used to aid the conduction of heat away from the component that needs to be cooled down (e.g. CPU) and into the heat sink.
•To determine the effectiveness of a thermal pad, the unit “K” is applied. Most of the other companies in the embedded market employ materials under K10 for economic reason. Perfectron, with the target of reaching CPU full speed without throttling, incorporates only K17 military grade as our principle specification.
•The thinner the thermal pad is the better effect it creates. The thickness of the thermal pad is crucial, be it too thick, the heat will cumulate and force the heat dissipated by the CPU to flow back.
•With precise calculation, the thermal pad we implemented is 3mm in height.
Heat Sink
Heat sink is known for improving the distribution of heat. Our tailor-made heat spreader is made with and aluminum. It can dissipate the heat in the quickest fashion.
•It contains 96% of aluminum, 48mm height and weighs 15g.
•Thermal paste is applied to give mechanical strength to the bond between heat sink and heat source. It eliminates air from the surface area and optimizes the heat transfer between the two contact surfaces.
•Excellent performance in heat dissipation.
Operating Temp.
Can withstand extended temperature from -40°C to 85°C – board level
Operating Temp. |
|
---|---|
UT : -40°C to 85°C |
|
System |
|
CPU |
Intel® Atom™ N2800 1.86 GHz |
Chipset |
Intel® NM10 Express Chipset (Intel® CG82NM10 PCH) |
Memory Type |
1 x 204-pin SO-DIMM DDR3 800/1066 MHz up to 4GB |
BIOS |
AMI® BIOS |
Super I/O |
ITE IT8783F |
Watchdog |
1-255 sec. or 1-255 min. software programmable, can generate system reset |
Expansion Slot |
|
Mini PCIe |
1 x miniPCIe for Gen2 |
Display |
|
Chipset |
Integrated Intel® GMA3650 VR Graphic core SGX545 |
DVI-I |
Yes (Max. resolution 1920 x 1200 @ 60 Hz) |
LVDS |
Supports 18/24-bit single/dual channel LVDS (Max. resolution 1920 x 1080 @ 60Hz) |
Dual Independent |
LVDS + DVI-I |
Audio |
|
Codec |
Realtek ALC269 High Definition Audio Codec *2W amplifier onboard |
Ethernet |
|
Chipset |
2 x RTL8111E GbE LAN(support 10/100/1000 Mbps for 2 x RJ45 ports) |
WOL |
Yes |
Boot from LAN |
Yes for PXE |
Rear I/O |
|
DVI-I |
1 x 29-pin DVI-I connector (female) |
Ethernet |
2 x RJ45 ports (support 10/100/1000 Mbps for 2 x RJ45 ports) |
COM |
1 x RS232/422/485 with 5V/12V selectable Serial Signals RS232: DCD-, RXD, TXD, DTR-, GND, DSR-, RTS-, CTS- RS422: TX-, RX+, TX+, RX-, GND, RS485: DATA-, DATA+, GND |
USB |
1 x USB 2.0 |
Reset Button |
1 |
Internal I/O |
|
SATA |
1 x SATAII (3 Gb/s) |
CF card |
1 x CF socket by SATA Gen2 interface |
USB |
6 x USB 2.0 ports by 2 x 5-pin header |
COM |
4 x COM ports COM2~COM5 ports support RS232 only with 5V/12V selectable by 1 x 10 box header |
Audio |
1 x 4-pin header for Speak-out |
LVDS |
30-pin connector |
PS/2 |
2 x 4-pin header |
LPT |
2 x 13-pin header |
DIO |
8-bit (4 in/4 out) |
OS support list |
|
Windows |
Windows 7 x32、Windows 7 x64 |
Linux |
Fedora 10、Fedora 14、Fedora 20、Open SUSE 12.2、Debian 7.0.0、Ubuntu 14.04 |
Mechanical and Environment |
|
Form Factor |
3.5" SBC |
Power Type |
12V DC-in, 4-pin ATX power connector, AT/ATX |
Dimension |
146 x 102 mm (5.7" x 4") |
Operating Temp. |
UT : -40°C to 85°C |
Storage Temp. |
-40°C to 85°C |
Relative Humidity |
10% to 90%, non-condensing |
Certification |
|
MIL-STD-810G |
|
Temperature Shock |
MIL-STD-810G Test Method 503.5 Temperature Shock Procedure I-C / Storage (Multi-cycle shocks from constant extreme temperature, Form 85°C to -40°C, Three cycle) |
High Temperature |
MIL-STD-810G Test Method 501.5 high Temp ( 96 hours @75°C non-operating + 72 hours @ 75°C operating ) |
Low Temperature |
MIL-STD-810G Test Method 502.5 Low Temp ( 96 hours @ -40°C non-operating +72 hours @ -40°C operating ) |
Test Result
Device Model |
OXY5316A |
Test Result |
Pass |
Tester |
Ian Huang |
|
|
Diagram of curves |
Test Temperature |
Test Time |
|
High 0°C to 85°C |
5Hours |
||
Low -40°C to 0°C |
2Hours |
||
Test Standard |
Reference IEC60068-2 |
||
Test Software |
Burnin test v6.0 |
||
Criteria |
After testing, system can’t halt. |
Test Configuration
Device | Configuration | Manufacturer | Part Number |
CPU Type | Intel® Atom™ Processor N2800 (1M Cache, 1.86GHz) (6.5W) | Intel | N2800 |
PCH | Intel® NM10 Express Chipset (Intel® CG82NM10 PCH) | Intel | NM10 |
Memory | Innodisk 2GB DDR3 1066 | ||
port2 SATAII | 128GB SATA SSD | ||
LAN1 | Realtek RTL8111E GbE LAN | Realtek | RTL8111E |
LAN2 | Realtek RTL8111E GbE LAN | Realtek | RTL8111E |
Test Software | Burnin test v7.1、HD Tune v4.01、iperf、Passmark USB2.0 CPUID HWMonitor 1.25,CPU Z-1.67,Core temp 1.0 RC6,Real temp 370 |
||
Chamber | KSON THS-b4t-150 Chipeng SMO-3 | KSON Chipeng | THS-b4t-150 SMO-3 |
Thermal Measurement
PERFECTRON provides real lab testing figures to show how CPU performance is with each tailor made thermal kits as important references and design guide for system engineers. For system integration, the crucial challenge is the operation performance under high temperature, thus PERFECTRON conducts long time experiments to make sure the superior testing result for all critical missions. By revealing temperature at processor T junction, processor die and heat sink, PERFECTRON is able to analyse the thermal solution we designed achieves maximum efficacy and observe CPU performance. The high temperature testing takes 5 hours which at each temperature point we burn in OXY5316A for one hour, from 50°C to 85°C.